SKF Bearing
NSK Bearing
FAG Bearing
TIMKEN Bearing
INA Bearing
NTN Bearing
KOYO Bearing
NACHI Bearing
Specifications
Design Unit | |
Cage Type | |
UPC Code | |
Cage Material | |
Superseded Part | |
Dimensions
d – Bore | |
D – Outer Diameter | |
B’ – Inner Ring Width | |
B – Outer Ring Width | |
Abutment and Fillet Dimensions
| R – Inner Ring “To Clear” Radius1 | |
| r – Outer Ring “To Clear” Radius2 | |
da – Inner Ring Backing Diameter | |
Da – Outer Ring Backing Diameter | |
Basic Load Ratings
C0 – Static Radial Rating | |
C1(2) – Dynamic Radial Rating (Two-Rows) | |
Factors
| e – ISO Factor3 | |
| Y0 – ISO Factor4 | |
| Y1 – ISO Factor5 | |
| Y2 – ISO Factor6 | |
Reference Thermal Speed Rating (Grease) | |
| Reference Thermal Speed Rating (Oil)7 | |
| Cg – Geometry Factor8 | |
- 1 Maximum housing fillet radius that bearing corners will clear.
- 2 Maximum shaft fillet radius that bearing corners will clear.
- 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 4 These factors apply for both inch and metric calculations. See engineering
- 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 7 See thermal speed ratings in the engineering section.
- 8 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.
