SKF Bearing
NSK Bearing
FAG Bearing
TIMKEN Bearing
INA Bearing
NTN Bearing
KOYO Bearing
NACHI Bearing
| Dimensions – d(inside diameter) | 30mm |
|---|---|
| Dimensions – D(outside diameter) | 72mm |
| Dimensions – B(width) | 20.75mm |
SKF Metric taper roller bearing priced cup & cone together 30mm inside x 72mm outside x 20.75mm width
SKF Taper roller bearings have tapered inner and outer ring raceways between which tapered rollers are arranged. The projection lines of all the tapered surfaces meet at a common point on the bearing axis. Their design makes taper roller bearings particularly suitable for the accommodation of combined (radial and axial) loads.
Taper roller bearings are generally separable, i.e. the cone, consisting of the inner ring with roller and cage assembly, can be mounted separately from the cup (outer ring).
SKF taper roller bearings have the logarithmic contact profile that provides optimum stress distribution over the roller/raceway contacts. The special design of the sliding surfaces of the guide flange and large roller ends considerably promote lubricant film formation in the roller end/flange contacts. The resulting benefits include increased operational reliability and reduced sensitivity to misalignment.
Principal dimensions:
Inside diameter d: 30mm
Outside diameter D: 72mm
Width T: 20.75mm
Basic load ratings:
Dynamic C: 56,1kN
Static Co: 56kN
Fatigue load limit Pu: 6,4kN
Speed ratings:
Reference speed: 7 500 r/min
Limiting speed: 10 000 r/min
Mass: 0,39kg
Dimensions:
d1: 48,4mm
B: 19mm
C: 16mm
r1,2 min: 1,5mm
r3,4 min: 1,5mm
a: 15mm
